More graphics

julialogo(;
    action=:fill,
    color=true,
    bodycolor=colorant"black",
    centered=false)

Draw the Julia logo. The default action is to fill the logo and use the colors:

julialogo()

If color is false, the bodycolor color is used for the logo.

The function uses the current drawing state (position, scale, etc).

The centered keyword lets you center the logo at its mathematical center, but the optical center might lie somewhere else - it's difficult to position well due to its asymmetric design.

To use the logo as a clipping mask:

julialogo(action=:clip)

(In this case the color setting is automatically ignored.)

To obtain a stroked (outlined) version:

julialogo(action=:path)
sethue("red")
strokepath()

juliacircles(radius=100)

Draw the three Julia circles ("dots") in color centered at the origin.

The distance of the centers of each circle from the origin is radius.

The optional keyword argument outercircleratio (default 0.75) determines the radius of each circle relative to the main radius. So the default is to draw circles of radius 75 points around a larger circle of radius 100.

Return the three centerpoints.

The innercircleratio (default 0.65) no longer does anything useful (it used to draw the smaller circles) and will be deprecated.

hypotrochoid(R, r, d, action=:none;
        stepby=0.01,
        period=0.0,
        vertices=false)

Make a hypotrochoid with short line segments. (Like a Spirograph.) The curve is traced by a point attached to a circle of radius r rolling around the inside of a fixed circle of radius R, where the point is a distance d from the center of the interior circle. Things get interesting if you supply non-integral values.

Special cases include the hypocycloid, if d = r, and an ellipse, if R = 2r.

stepby, the angular step value, controls the amount of detail, ie the smoothness of the polygon,

If period is not supplied, or 0, the lowest period is calculated for you.

The function can return a polygon (a list of points), or draw the points directly using the supplied action. If the points are drawn, the function returns a tuple showing how many points were drawn and what the period was (as a multiple of pi).

epitrochoid(R, r, d, action=:none;
        stepby=0.01,
        period=0,
        vertices=false)

Make a epitrochoid with short line segments. (Like a Spirograph.) The curve is traced by a point attached to a circle of radius r rolling around the outside of a fixed circle of radius R, where the point is a distance d from the center of the circle. Things get interesting if you supply non-integral values.

stepby, the angular step value, controls the amount of detail, ie the smoothness of the polygon.

If period is not supplied, or 0, the lowest period is calculated for you.

The function can return a polygon (a list of points), or draw the points directly using the supplied action. If the points are drawn, the function returns a tuple showing how many points were drawn and what the period was (as a multiple of pi).

cropmarks(center, width, height)

Draw cropmarks (also known as trim marks).

dimension(p1::Point, p2::Point;
    format::Function   = (d) -> string(d), # process the measured value into a string
    offset             = 0.0,              # left/right, parallel with x axis
    fromextension      = (10.0, 10.0),     # length of extensions lines left and right
    toextension        = (10.0, 10.0),     #
    textverticaloffset = 0.0,              # range 1.0 (top) to -1.0 (bottom)
    texthorizontaloffset = 0.0,            # range 1.0 (top) to -1.0 (bottom)
    textgap            = 5,                # gap between start of each arrow (≈ fontsize?)
    textrotation       = 0.0,
    arrowlinewidth     = 1.0,
    arrowheadlength    = 10,
    arrowheadangle     = π/8)

Calculate and draw dimensioning graphics for the distance between p1 and p2. The value can be formatted with function format.

p1 is the lower on the page (ie probably the higher y value) point, p2 is the higher on the page (ie probably lower y) point.

offset is to the left (-x) when negative.

Dimension graphics will be rotated to align with a line between p1 and p2.

In textverticaloffset, "vertical" and "horizontal" are best understood by "looking" along the line from the first point to the second. textverticaloffset ranges from -1 to 1, texthorizontaloffset in default units.

        toextension
        [5  ,  5]
       <---> <--->
                             to
       -----------            +
            ^
            |

           -50

            |
            v
       ----------            +
                            from
       <---> <--->
         [5 , 5]
       fromextension

            <---------------->
                  offset

Returns the measured distance and the text.

barchart(values;
        boundingbox = BoundingBox(O + (-250, -120), O + (250, 120)),
        bargap=10,
        margin = 5,
        border=false,
        labels=false,
        labelfunction = (values, i, lowpos, highpos, barwidth, scaledvalue) -> begin
                label(string(values[i]), :n, highpos, offset=10)
          end,
        barfunction =  (values, i, lowpos, highpos, barwidth, scaledvalue) -> begin
            @layer begin
                setline(barwidth)
                line(lowpos, highpos, :stroke)
            end
          end)

Draw a barchart where each bar is the height of a value in the values array. The bars will be scaled to fit in a bounding box.

Text labels are drawn if the keyword labels=true.

Extended help

The function returns a vector of points; each is the bottom center of a bar.

Draw a Fibonacci sequence as a barchart:

fib(n) = n > 2 ? fib(n - 1) + fib(n - 2) : 1
fibs = fib.(1:15)
@draw begin
    fontsize(12)
    barchart(fibs, labels=true)
end

To control the drawing of the text and bars, define functions that process the end points:

mybarfunction(values, i, lowpos, highpos, barwidth, scaledvalue)

mylabelfunction(values, i, lowpos, highpos, barwidth, scaledvalue)

and pass them like this:

barchart(vals, barfunction=mybarfunction)
barchart(vals, labelfunction=mylabelfunction)

function myprologfunction(values, basepoint, minbarrange, maxbarrange, barchartheight)
    @layer begin
        setline(0.2)
        for i in 0:10:maximum(values)
            rule(boxbottomcenter(basepoint) + (0, -(rescale(i, minbarrange, maxbarrange) * barchartheight)))
        end
    end
end

boxmap(A::Array, pt, w, h)

Build a box map of the values in A with one corner at pt and width w and height h. There are length(A) boxes. The areas of the boxes are proportional to the original values, scaled as necessary.

The return value is an array of BoxmapTiles. For example:

[BoxmapTile(0.0, 0.0, 10.0, 20.0)
 BoxmapTile(10.0, 0.0, 10.0, 13.3333)
 BoxmapTile(10.0, 13.3333, 10.0, 6.66667)]

with each tile containing (x, y, w, h). box() and BoundingBox() can work with BoxmapTiles as well.

Example

using Luxor
@svg begin
    fontsize(16)
    fontface("HelveticaBold")
    pt = Point(-200, -200)
    a = rand(10:200, 15)
    tiles = boxmap(a, Point(-200, -200), 400, 400)
    for (n, t) in enumerate(tiles)
        randomhue()
        bb = BoundingBox(t)
        box(bb - 2, :stroke)
        box(bb - 5, :fill)
        sethue("white")
        text(string(n), midpoint(bb[1], bb[2]), halign=:center)
    end
end 400 400 "/tmp/boxmap.svg"